SB220 Harbach suppressor kit

AB5YG at aol.com AB5YG at aol.com
Wed Apr 10 00:19:04 EDT 1996


Thanks for the many thoughts on  SB-220 stabilization - I have used my amp
since 1972 with no modifications - still using original tubes -- I "fried"
the plate parasitic choke resistors a month ago while on 10M.  The HV
resistor string for the volt meter also bit the dust a while back.  I figured
now would be a good time to clean out the 24 years of dust and fix what was
broken. Oh - The plate tunning cap was binding - A little Polyphaser
conductive goo fixed that problem - should be good for another 24 yrs - hi -

I installed the Harbach parasitic suppressor kit and HV rectifier/meter board
kit this past weekend.  I am very satisified with the kits and my SB-220
works just fine.

73 - Bill - AB5YG (ex K2MHJ)

PS - The secret to getting years ouf of a SB-220 is: Give it all the air you
can get and have a spare plate transformer around for "insurance".


>From Jim Reid <jreid at aloha.net>  Wed Apr 10 05:21:10 1996
From: Jim Reid <jreid at aloha.net> (Jim Reid)
Date: Tue, 09 Apr 1996 18:21:10 -1000
Subject: general class code test
Message-ID: <1.5.4b12.32.19960410042110.006cb8c8 at aloha.net>

At 16:17 4/9/96 CDT, Paul Fischer wrote:
>Hi Everyone,
>  I am about to take the general class code test and would appreciate 
>any words of advise. Thanks alot.
>
>
>73 kb9kgr


Just relax!

73, Jim, AH6NB




More information about the CQ-Contest mailing list