Pointy tops on Rohn 25

[K8DO at aol.com]

The M2 - Orion - 2800 ( big rotor ) will go into the top section (pointy) of
25G without cutting if you bow/pry the side braces outwards just slightly (
<= 1/4" )


Denny

>From Jay <d7507 at microagewny.com>  Sat Apr 13 17:49:43 1996
From: Jay <d7507 at microagewny.com> (Jay)
Date: Sat, 13 Apr 1996 12:49:43 -0400
Subject: RF Applications' p-3000
Message-ID: <199604131649.MAA10931 at microagewny1.microagewny.com>

Hello Everyone,

Thank you for your input on the HF2500 amp., I have one "on the way".

I am considering an RF Applications P-3000 Digital RF Power/VSWR Indicator
because of the relay cut-out when swr.3:1(3cx800 protection). I also like to 
monitor swr. My first choice was the Nye Viking Power monitor but these seem
hard to find new. 

I have a Bird 43 and 2500 wt slug, but no swr auto cut-out.

I tend to make MEGA MISTAKES when operating a contest and am concerned about
damaging the TR relay and/or finals! I usually concentrate on the "log screen".

Would the P-3000 LEDs sreve as a power-output indicator for tune-up or should
I just use the bird 43 and not wory about auto swr cut-out??

Again, thank you for your time and putting up with a "new" contester.

73/TU!
Jay,AA2IX
Jay Sturtevant  AA2IX
d7507 at microagewny.com


>From jfunk at adams.net (jim funk)  Sat Apr 13 17:59:56 1996
From: jfunk at adams.net (jim funk) (jim funk)
Date: Sat, 13 Apr 1996 11:59:56 -0500
Subject: SS
Message-ID: <9604131659.AA23375 at golden.adams.net>

m/s low-power in SS: count us in!
        N9JF et.al.