INVISIBLE DOG FENCE RFI

WR34SHE at shellus.com WR34SHE at shellus.com
Mon May 13 14:09:32 EDT 1996


FROM: SAM EFFINGER  K9SD
SUBJECT: INVISIBLE DOG FENCE RFI

I am in the process in having one of those invisible dog fences installed and
was wondering if anyone has had any rfi trouble with them..

That is causing or receiving RFI

This is from a company called the Invisible Fence company...they are suppose
to have some codes that are required to activate the Dog collar...

I didn't want to fence in 2 aces and this is a great option..

They are installing this thing Wednesday of this week so reply directly if
you have any input.

Will be at spaces 2155 2156 2157  in Dayton ...stop by for some contest chat


                  K9SD

>From w6go at netcom.com (Jay O'Brien - W6GO)  Mon May 13 22:42:22 1996
From: w6go at netcom.com (Jay O'Brien - W6GO) (Jay O'Brien - W6GO)
Date: Mon, 13 May 1996 14:42:22 -0700 (PDT)
Subject: Amplifier bandwidth
Message-ID: <199605132142.OAA29536 at netcom2.netcom.com>

I trust that your attention to detail when building your amplifiers is 
better than your attention to detail in sending a four thousand line message 
to a thousand people.



>From k1vr at k1vr.jjm.com (Fred Hopengarten)  Mon May 13 15:33:27 1996
From: k1vr at k1vr.jjm.com (Fred Hopengarten) (Fred Hopengarten)
Date: Mon, 13 May 1996 10:33:27 EDT
Subject: Source of bolts & Timewave
Message-ID: <3197483a.k1vr at k1vr.jjm.com>

On Sun, 12 May 1996 16:53:28 -0400 (EDT), ezimmerm at dgs.dgsys.com wrote:

> > K1VR:  Why?  I've used SS nuts and
> > bolts on my Rohn 25 and am well pleased.  In places
> > around the tower where I used the Rohn galvanized nuts and
> > bolts, they have rusted after 14 years -- but the SS stuff
> > still looks good as new.  You just have to remember to
> > tighten up SS a few days after installation and a year after
> > installation.

> As for the SS bolts, the advice is NOT to use them because they gall.
> When that happens, they seize up and you need a blowtorch to get them
> off.  Frank Donovan is particularly adamant in not using them.  There is
> some kind of SS anti-galling compound available but I don't know how well
> it works.
>
> 73  Gene  ZZ

K1VR:  A ha!  A genuine Pepsi vs. Coke controversy.  It
appears that there really are two camps:  Galvi and SS.  I
agree that galling (note that Dr. Zimmerman, as always, has
spelled it correctly) is a problem and should not be
ignored.  Suggestions:  (1)  Buy 10% more hardware than you
specifically need.  This allows for losses due to galling
and "ooops, I dropped one."  (2)  Go to any John Deere
dealer and buy an 8 oz. applicator can of Never-Seez (a
registered trademark of Emhart Chemical Group), manufactured
for John Deere & Company.  (3)  Be sure you own a high
quality set of socket wrenches.  The $3.99 set, made in
India, you bought at a flea market won't do it.

     A high quality set of socket wrenches and a long handle
will allow you to break off either a bolt head or a nut
using the principle of leverage.  Belt yourself on and tell
the guy at the bottom of the tower to stand back.  This is
also pretty much the trick you'll be using when your
galvanized hardware seizes due to corrosion.  I much prefer
leverage to hacksaws when a seizure or galling problem
arises.

     Note to K7LXC:  You owe it to your readers to tell them
about Never-Seez.  It is applied just BEFORE the bolt is
shoved through the hole, or the nut is turned on.
-- 
                      Fred Hopengarten K1VR
           Six Willarch Road * Lincoln, MA 01773-5105
     home + office telephone:  617/259-0088 (FAX on demand)
                   internet:  k1vr at k1vr.jjm.com
            "Big antennas, high in the sky, are better
                       than small ones, low."

>From tomf at neca.com (Tom Francis)  Tue May 14 00:49:25 1996
From: tomf at neca.com (Tom Francis) (Tom Francis)
Date: Mon, 13 May 1996 19:49:25 -0400
Subject: Source of bolts & Timewave
Message-ID: <199605132349.TAA20913 at orion.neca.com>

At 10:33 AM 5/13/96 EDT, you wrote:

2)  Go to any John Deere dealer and buy an 8 oz. applicator 
can of Never-Seez (a registered trademark of Emhart Chemical 
Group), manufactured for John Deere & Company. 

        Fred:

        Actually, you can buy Never Sneeze (sri, inside joke)
        at any auto parts store...

        I personally vouch for Never Seeze - it's like
        Permatex - great stuff!! Cheap to and will save you
        a lot of busted knuckles. I use it anywhere there is
        metal to metal contact (like lug nuts, exhaust fittings,
        header bolts, etc.) and have never had problems removing
        nuts, bolts, clamps, etc... 

        No, I don't work for Emhart - just a satisfied user for
        many many years...

        73

        Tom, NM1Q (tomf at neca.com)


>From je1cka at dumpty.nal.go.jp (Takao KUMAGAI)  Tue May 14 02:00:18 1996
From: je1cka at dumpty.nal.go.jp (Takao KUMAGAI) (Takao KUMAGAI)
Date: Tue, 14 May 1996 10:00:18 +0900
Subject: Technologies Announces the HF-2500DX Linear Amplifier
Message-ID: <199605140100.KAA19291 at dumpty.nal.go.jp>

Please!!

on 96/05/13, QRO Technologies, Inc. writes:
   Date: Mon, 13 May 1996 03:48:10 -0400 (EDT)
   From: qrotec at bright.net (QRO Technologies, Inc.)
   Reply-To: qrotec at bright.net (QRO Technologies, Inc.)

DO NOT POST such big file to the reflector!!
This caused the big problems at various site because 
email size limitation.

This email size was 388k! UNBELIEVABLE!!

You(or others) post only the index and distributes the 
file(s) to whom requested.

> --=====================_831984555==_
> Content-Type: text/plain; charset="us-ascii"

> We here at QRO Technologies proudly annouce the development of our HF-2500DX
> linear amplifier using two Svetlana 4CX800A tetrodes. Come see us at the
> Dayton Hamvention. The attached file is a Word Perfect 6.0 file.

> Best 73's

> Ray C. (KB8VU)

> --=====================_831984555==_
stuff ofcourse deleted.
	---------
	Tack Kumagai JE1CKA/KH0AM
	TEL:81-30-066-6408, FAX:81-423-93-4449
	Internet: je1cka at nal.go.jp

>From harpole at pegasus.cc.ucf.edu (Charles H. Harpole)  Tue May 14 02:02:45 1996
From: harpole at pegasus.cc.ucf.edu (Charles H. Harpole) (Charles H. Harpole)
Date: Mon, 13 May 1996 21:02:45 -0400 (EDT)
Subject: June QST out
Message-ID: <Pine.SOL.3.93.960513205823.19924E-100000 at Pegasus>

I have a mental pic of Henry tooling way down to his mailbox in a 1938
Ford pickup, down into ravines and waddies, thru pastures beset by bison, 
up over hillocks and paddocks, and--all the while--with his eyes pealed
for pesky Whiteskins and snakeskins.  Then . . . . . on the way back,
driving into a mess o'wait-a-bits while pursuing (and taking copious notes
on) the contents of his very early delivery on month after next's issue of
a ham magazine.   Am I right, or am I right!  de K4VUD


>From harpole at pegasus.cc.ucf.edu (Charles H. Harpole)  Tue May 14 02:16:29 1996
From: harpole at pegasus.cc.ucf.edu (Charles H. Harpole) (Charles H. Harpole)
Date: Mon, 13 May 1996 21:16:29 -0400 (EDT)
Subject: Source of bolts for towers
Message-ID: <Pine.SOL.3.93.960513211314.19924I-100000 at Pegasus>

I, too, have experienced galling (sp. correct!) and the cure was NOT "ever
siezzze" but some kind of motion lotion.  My pins are, however, not in the
least stainless (got some nasty ones the other month), but are hot dipped
whenever the Madam in the tall, black boots biles the water and pours it
on, so to speak.  
de K4VUD


>From harpole at pegasus.cc.ucf.edu (Charles H. Harpole)  Tue May 14 02:30:56 1996
From: harpole at pegasus.cc.ucf.edu (Charles H. Harpole) (Charles H. Harpole)
Date: Mon, 13 May 1996 21:30:56 -0400 (EDT)
Subject: WR3SHE, and Invis. Dog Fence
Message-ID: <Pine.SOL.3.93.960513212930.19924M-100000 at Pegasus>

What a call sign!

I think your real problem will be the distinct stinging sensation around
your neck you will get when the wife turns on the control voltage.
de K4VUD




More information about the CQ-Contest mailing list