[CQ-Contest] Kenwood 930 problems?

Tom Hammond n0ss at sockets.net
Sat May 23 10:31:37 EDT 1998


KU9C wrote (regarding the list of TS-930S DIGITAL BOARD plated-thru 
hole problems):

>tom, can you post the list, or at least, can I get a copy.. 
>Be glad to send a sase, copy costs, etc.

I'm in the process of scanning in the page(s) which cover this
problem.  There are four (4) pages and they're not all that
well printed in the first place.  Additionally, it includes
a drawing of the DIGITAL BOARD with numeric references to which
of the holes are which.. you won't be able to do ANYTHING if you
don't know which hole controls which problem.

Anyway, I should have one or more .JPG (maybe .GIF since it's
all B&W) files ready to release later today.  If Bill, W4NA,
will permit, I'll dump them to his FTP site (and directly to you)
for others to access as well.

Won't send anything, however, until I get it 'sanitized' a bit.

73 - Tom Hammond   N0SS


>tnx
>
>steve ku9c
>
>-----Original Message-----
>From: Tom Hammond <n0ss at sockets.net>
>To: cq-contest at contesting.com <cq-contest at contesting.com>
>Date: Friday, May 22, 1998 11:39 PM
>Subject: [CQ-Contest] Kenwood 930 problems?
>
>
>>>I recall this 'problem' being limited to an early serial number, like
>>>everything up to 3M or 5M numbers, but I'm pulling this
>>>from memory.  Anyone have the details on this 'range'.
>>
>>I believe the range was pre-3-million S/N.  I know that they came
>>out with a new RF board starting with 3 million, and I believe
>>they also fixed the plated-thru hole problem at the same time.
>>
>>The problem was prevalent enough that Tech Support in JA (I believe
>>it was JA anyway) came out with a list of digital board-related
>>problems and which of the plated thru holes you had to re-solder
>>to fix that particular problem.  I've had to use the list to fix
>>930's of friends and so far, the list works.  I usually try to
>>re-solder as many of the holes as I can easily access when I'm in
>>there.
>>
>>My '930 was bought about 15 or so years ago and it's still working
>>like a champ today... albeit with many plated thru holes resoldered.
>>
>>73 - Tom Hammond   N0SS
>>
>>
>>--
>>CQ-Contest on WWW:        http://www.contesting.com/_cq-contest/
>>Administrative requests:  cq-contest-REQUEST at contesting.com
>>
>


--
CQ-Contest on WWW:        http://www.contesting.com/_cq-contest/
Administrative requests:  cq-contest-REQUEST at contesting.com



More information about the CQ-Contest mailing list