[CQ-Contest] FT1000MP MONI Problem

[Jim Martin - MM0BQI]

Mike
I don't think it is anything you have done. I have the same when using Inrad
narrow filters on RTTY I lose the monitor sound.
Using CW I have no monitor output but listen to the sidetone for all filter
settings.
Possibly a menu setting somewhere?
73
Jim,  MM0BQI


** IOTA DXpedition EU108 Treshnish Isles 3-6 June 2005
www.qsl.net/mm0bqi/eu108.htm **
       **IOTA Contest DXpedition  July 2005 MM0Q  Summer Isles EU092 **



-----Original Message-----
From: cq-contest-bounces at contesting.com
[mailto:cq-contest-bounces at contesting.com]On Behalf Of K5NZ at aol.com
Sent: 20 April 2005 12:03
To: cq-contest at contesting.com
Subject: [CQ-Contest] FT1000MP MONI Problem


Thanks for reading...

I just installed the Inrad  roofing filter, both 500hz cw, both 250hz cw
filters, and the key click mod.  Everything seems to work fine but noticed
if in
CW mode and I have the MONI On and am in the 500 or 250 filter position
there
is no sound?  I put it back down in 2.0 and the MONI volume control works
fine??  Any ideas appreciated?  I called Inrad to see if this had happened
to
anyone else and they never heard of it and had no idea what would have
caused it?
Worked fine before I installed all the above.

TIA  Mike K5NZ
_______________________________________________
CQ-Contest mailing list
CQ-Contest at contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.17 - Release Date: 19/04/2005

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.17 - Release Date: 19/04/2005