[CQ-Contest] RTTY SO2R setup

[David Robbins K1TTT]

You don't say if you are using fsk or afsk... with n1mm/mmtty I do so2r rtty
with 2 com ports and one sound card using afsk.  Basically you set up 2
instances of mmtty, one for the left channel of the card and one for the
right.  you make a special cable that takes the audio from the left radio
and puts it on the left channel in to the sound card, and the audio from the
right radio to the right channel.  you split the audio output from the sound
card to go to both radios.  I use psk on the mp and put the tx audio in to
the psk jack on the back.  

If you are doing fsk through the rigblasters I think you need 4 com ports.


David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
 

> -----Original Message-----
> From: cq-contest-bounces at contesting.com [mailto:cq-contest-
> bounces at contesting.com] On Behalf Of ukbrown
> Sent: Friday, January 26, 2007 18:26
> To: cq-contest at contesting.com
> Subject: Re: [CQ-Contest] RTTY SO2R setup
> 
>    I am trying to get my SO2R to work with RTTY. Here are
> the rigs. Rig 1 FT1000mp Rig 2 FT1000D..two Rigblaster Plus
> DX Doubler..Built computer using Windows 2000XP Pro. MTTY
> and N1MM. We got the Rig 2 FT1000D to work through a spare
> com port on the computer.
> Here is my question. Do I need another com port on the
> computer to do the same as I have for Rig 2 inorder todo
> SO2R and will I need an additional sound card to accommdate
> this type of set up. Any help is appreciated. Please email
> ukbrown at aol.com   or   ukbrown at acsol.net
> 73's PTL bill brown
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest at contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest