[CQ-Contest] ARRL Field Day

[Joe]

Hi Gary,

No what the problem was it wouldn't take the pass K & VE first.  it 
would pass everything.  it took about three of four  tries for it to 
take for some reason.  But once it took i left it run for about a hour 
on 20 meters on N1MM  all bands on CC and N1MM open on 20, and only 
stateside and VE's were seen.  way cool.

I know someone mentioned why not leave it open to all DX included since 
you can work DX on FD and get points.  But I rarely remember many DX 
contacts in the logs.  and to clutter the bandmap with all their calls 
seems counter productive ya know?

Joe WB9SBD
On 6/10/2010 9:50 PM, Gary K9GS wrote:
> Joe,
>
> After you had CC User running and feeding N1MM did you, by chance, hit 
> either the SH/DX button in the N1MM bandmap or type SH/DX in CCuser?  
> Or hit the "Get all" button in CC User?  If you did any of these 
> things, you essentially fed an unfiltered stream through CC User and 
> into N1MM.  A definite no-no and that would explain the N1MM bandmap 
> populating as you described.
>
> It sounds like you have everything working like it should be.  Just 
> leave it alone for a while and see how it works over time.  I suspect 
> you'll be OK.
>
>
> 73,
>
> -Gary K9GS
> GMDXA Web Site:  www.gmdxa.org
>
>
> ----- Original Message ----- From: "Joe" <nss at mwt.net>
> To: <cq-contest at contesting.com>
> Sent: Thursday, June 10, 2010 8:22 AM
> Subject: Re: [CQ-Contest] ARRL Field Day
>
>
>> Yup that's the plan,
>> Maybe also have CW GET or Skimmer running for the less proficient CW ops
>> too.
>>
>> Now heres a question,,  Playing with the set up here.  I of course need
>> to filter the spots.
>>
>> It was sugested to use the ve7cc program and the reverse beacon network
>> for the sourse of spots and filter for N1Mm to look at.
>>
>> Ok, I got CC running and getting the spots from the reverse beacon
>> network fine.  I think I set the filters to just pass USA and Canada,
>>
>> And I was able to tell N1MM  to get the spots for the bandmap from CC
>>
>> But when fired up  the bandmap in N1MM  is still full of DX.
>>
>> what do i have set wrong?
>>
>> Joe WB9SBD
>>
>> The Original Rolling Ball Clock
>> Idle Tyme
>> Idle-Tyme.com
>> http://www.idle-tyme.com
>>
>> On 6/10/2010 6:28 AM, Pescatore,John wrote:
>>> Hi,Joe - for hard core experienced FD ops, probably would be a good 
>>> idea. I like Pete's idea - if you are using N1MM, set up spotting 
>>> and have the Available Mult/QSO window show them by time and get 
>>> them using that to do high speed S&Ping across, not just within, bands.
>>>
>>> 73, John K3TN
>>>
>>> ________________________________
>>> This e-mail message, including any attachments, is for the sole use 
>>> of the person to whom it has been sent, and may contain information 
>>> that is confidential or legally protected. If you are not the 
>>> intended recipient or have received this message in error, you are 
>>> not authorized to copy, distribute, or otherwise use this message or 
>>> its attachments. Please notify the sender immediately by return 
>>> e-mail and permanently delete this message and any attachments. 
>>> Gartner makes no warranty that this e-mail is error or virus free.
>>> _______________________________________________
>>> CQ-Contest mailing list
>>> CQ-Contest at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/cq-contest
>>>
>>>
>>>
>> _______________________________________________
>> CQ-Contest mailing list
>> CQ-Contest at contesting.com
>> http://lists.contesting.com/mailman/listinfo/cq-contest
>>
>
>
>