[CQ-Contest] FT5000 N1MM SCU17

[Trent Sampson]

Solution thanks to VK7BEN

Use CAT commands

How this works is the CQ F1 Button CAT command switches to rear panel then operator wave file is selected and then Cat command switches back to the front.

F1 CQ,{CAT1ASC EX1031;}{OPERATOR}\Cq.wav{END}{CAT1ASC EX1030;}
F2 EXCHANGE,{CAT1ASC EX1031;}{OPERATOR}\Exchange.wav{END}{CAT1ASC EX1030;}
F3 TNX,{CAT1ASC EX1031;}{OPERATOR}\Thanks.wav{END}{CAT1ASC EX1030;}
F4 VK4KW,{CAT1ASC EX1031;}{OPERATOR}\VK4KW.wav{END}{CAT1ASC EX1030;}
F5 LongCQ,{CAT1ASC EX1031;}{OPERATOR}\LongCq.wav{END}{CAT1ASC EX1030;}
F6 BRAG,{CAT1ASC EX1031;}{OPERATOR}\BRAG.wav{END}{CAT1ASC EX1030;}

Worked fine all weekend any key or footswitch will stop the Voice Message. Check the TX level on SCU17 to prevent overdrive

FT5K SCU17 N1MM

73

VK4TS Trent
@VK4KW