[CQ-Contest] Station Re-Build - Coax

Wayne Kline w3ea at hotmail.com
Wed Mar 13 11:55:47 EDT 2019


Sorry to hear that.

 A CHINA rip off and with no    printed  RG 400 on the inner coral jacket a RIP for sure thanks for the heads up

Wayne W3EA

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

________________________________
From: N4ZR <n4zr at comcast.net>
Sent: Wednesday, March 13, 2019 9:51:25 AM
To: Wayne Kline; charlie carroll; cq-contest at contesting.com
Subject: Re: [CQ-Contest] Station Re-Build - Coax


I just bought 10 feet of RG-400U (supposedly Harbour Industries) through E-bay for $13.  Belatedly, I learned it was coming from China.  It's now here, but I don't think it is for real - it only has one shield, and is somewhat stiff.  At least the inner conductor isn't magnetic.There's no printing on the cable.

Buyer beware.


73, Pete N4ZR
Check out the Reverse Beacon Network
at <http://reversebeacon.net><http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.


On 3/12/2019 11:35 PM, Wayne Kline wrote:

I third  the sugjestion of the RG400   small enough for  all the switching   in a more then one radio setup.

The  tight bend radius the  small diameter make for a clean instlation that coupled with the double shielding   it’s a WIN WIN

Watch  Ebay or other surplus suppliers



Wayne W3EA



Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986><https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10



________________________________
From: CQ-Contest <cq-contest-bounces at contesting.com><mailto:cq-contest-bounces at contesting.com> on behalf of charlie carroll <k1xx at k1xx.com><mailto:k1xx at k1xx.com>
Sent: Tuesday, March 12, 2019 10:23:06 PM
To: cq-contest at contesting.com<mailto:cq-contest at contesting.com>
Subject: Re: [CQ-Contest] Station Re-Build - Coax

Keith:
A couple very similar candidate cables are RG-400 and RG-303. RG-400 is
double shielded while 303 is single.  They're good as interconnects
because they have a small bend radius (about 1"). RG-400 uses
multi-strands of copper for the center conductor; RG-300 uses copper
clad steel.  Either will handle 1500 watts at HF.

73 charlie, k1xx

On 3/12/2019 7:51 PM, Keith Dutson wrote:


My multi-two station, with third spotting station, is being rebuilt into new
digs.  I have a lot of 3-4 foot RG213 cables running between the amp, power
meter, tuner and switch.  I have heard there may be a smaller cable that has
very little loss, but handles 1500 watts.  I would appreciate any comments
on what is being used today.  Thanks.

73, Keith NM5G
_______________________________________________
CQ-Contest mailing list
CQ-Contest at contesting.com<mailto:CQ-Contest at contesting.com>
http://lists.contesting.com/mailman/listinfo/cq-contest




_______________________________________________
CQ-Contest mailing list
CQ-Contest at contesting.com<mailto:CQ-Contest at contesting.com>
http://lists.contesting.com/mailman/listinfo/cq-contest
_______________________________________________
CQ-Contest mailing list
CQ-Contest at contesting.com<mailto:CQ-Contest at contesting.com>
http://lists.contesting.com/mailman/listinfo/cq-contest




More information about the CQ-Contest mailing list