CT9.20 buglist

[Barry Kutner]

Tony Brock-Fisher <fisher@hp-and.an.hp.com> writes:

> 3. If you have no radio2 selected in the setup menu, then
> the ALT-period key should be disabled. Here's why: I accidently
> hit the ALT-period, switching to (non-existent) radio2. I didn't
> notice this. However, Radio2 was set on 40 meters, so the until
> I notice the problem, my 20 meter Q's get logged on 40. Solution
> is to go back in the log and fix the bands manually, and hit 
> alt-period again to go back to radio1 (computer controlled).
> This ALT-period thing actually happens a lot, cause its
> right next to ALT-comma, the band map feature, which gets
> used a lot.
> 
I disagree with this one. When I use my FT-1000 and use the subrcvr as a 
semi-separate radio, I use the ALT period to log the S&P subrcvr station, 
at times. This is done if I fall behind entering the info from the 
primary freq, but wanna switch and work other stn.

Maybe make this a start-up option flag.


--
=======================================================================
Barry N. Kutner, W2UP       Usenet/Internet: barry@w2up.wells.com
Newtown, PA                 Packet Radio: W2UP @ WB3JOE.#EPA.PA.USA.NA
                            Packet Cluster: W2UP >K2TW (FRC)
.......................................................................


--
Submissions:              ct-user@eng.pko.dec.com
Administrative requests:  ct-user-request@eng.pko.dec.com
Problems:                 reisert@eng.pko.dec.com