PK-88 and CT -- Summary additions.

Swanson, Glenn, KB1GW gswanson@arrl.org
Thu, 09 Nov 95 10:06:00 EST


Oh, and another:
(aka: Posted the summary a tad before I looked through my entire in-box. HI)

THE ONLY WAY I COULD GET THIS COMBINATION TO WORK WAS TO USE A COMMAND 
PROGRAM
(A MACRO) TO SET UP THE TNC BEFORE I START CT, THE SAME WAY I SET UP MY 
TSR's
BEFORE STARTING CT. I USE PROCOMM TO SET UP THE TNC PARAMETERS. YOU COULD 
USE
ANYTHING AND ELSE AND YOU COULD DO THIS MANUALLY EACH TIME YOU WANT TO RUN 
CT.
I CAN'T EXPLAIN EITHER THE PROBLEM OR THE SOLUTION  BUT I HAD EXACTLY THE 
SAME
SYMPTOMS UNTIL I STUMBLED ON THIS METHOD THAT WORKS FOR ME.

73 JOHN - K2AZ
 - - - - - - - - - - - - - -
Hi Glenn,

My PK-88 works fine with CT. You might check your COM port setups.

73. Ken, AB6FO, KWIDELITZ@DELPHI.COM

--
Submissions:              ct-user@ve7tcp.ampr.org
Administrative requests:  ct-user-REQUEST@ve7tcp.ampr.org
WWW:                      http://ve7tcp.ampr.org/Lists/ct-user.html
Questions:                reisert@ve7tcp.ampr.org