V9.27 and FT1000mp

[Assarabowski, Richard]

We had the same problem at K1KI on 160 when setting up for the contest (just 
a few hours before the start).  Tom started pulling network cards and extra 
serial ports from his computer until we realized that the radio was in the 
"memory tuning" mode instead of the "VFO" mode.  That immediately cured the 
problem.   The memory tuning mode is entered whenever you put something from 
memory (including quick memories) into the VFO , so it's likely to go into 
that mode during a contest.

Another bug (mentioned on this reflector already) is that the band map 
frequency gets screwed up when the RIT (sri, clarifier) is on.  I used it as 
a "feature" and not a "bug" to scroll to a different part of the band map 
which was not visible, and actually found it quite useful (assuming I 
remember to clear the VFO when I was done!).

                              -- Rich K1CC
                                  assarar@utrc.utc.com
 ----------
>I recently downloaded this version and find that it doesnt interface with 
the
>MP in the Band Map window. Here are the symptoms. "CAT" lite flashes on MP,
>Freq displayed on CT is 14349.2 (never changes). I can qsy the MP by typing
>the freq into the call sign window. The band map freq shows this new freq 
for
>one second, then reverts to 14349.2.The computer interface is the same
>harness I have successfully used with my FT-1000D. The comtsr's are all
>configured properly, ie, 1 and 4 are downloaded and 2 and 3 are set for the
>Tnc and Radio. Anybody had same problem or any suggestions? 73 Tom.

--
Submissions:              ct-user@ve7tcp.ampr.org
Administrative requests:  ct-user-REQUEST@ve7tcp.ampr.org
WWW:                      http://ve7tcp.ampr.org/Lists/ct-user.html
Questions:                reisert@ve7tcp.ampr.org