[ct-user] Ft-1000MP & CT

[Howard Brainen]

Not sure about the N81 or N82.  I do comtsr3 -b4800
since I'm using com:3 and it works fine with my mp.

73, Howard WZ6Z

----------
> From: Victor A. Dubois <n4to@ct.net>
> To: ct-user@ve7tcp.ampr.org
> Subject: [ct-user] Ft-1000MP & CT
> Date: Wednesday, January 08, 1997 8:33 PM
> 
> I am unable to get CT and my new FT-1000MP to correctly communicate. I
have
> no trouble with the TR logging program, but haven't broken the CT habit
yet.
> 
> I'm at the following point. Am using the version 9.27 downloaded from the
> BBS which said it supports the MP. I load up the COMTSR at 4800 baud
either
> with N81 or N82 no difference being made. The results follow:
> 
>      CHANGING BANDS AT THE RIG: the rig changes, nothing at the computer.
> 
>      CCHANGING BANDS AT THE COMPUTER: the computer momentarily changes to
> the      correct band and then immediately returns to 20. The rig changes
> to the      correct band. 
> 
> Haven't tried getting fancy with band map etc., yet want to get the
basics
> working first. Any suggestions would be appreciated and welcome.
> 
> 73,
> 
> Vic   N4TO
> n4to@ct.net
> 
> 
> --
> Submissions:              ct-user@ve7tcp.ampr.org
> Administrative requests:  ct-user-REQUEST@ve7tcp.ampr.org
> WWW:                      http://www.ve7tcp.ampr.org/Software/ct
> Questions:                owner-ct-user@ve7tcp.ampr.org

--
Submissions:              ct-user@ve7tcp.ampr.org
Administrative requests:  ct-user-REQUEST@ve7tcp.ampr.org
WWW:                      http://www.ve7tcp.ampr.org/Software/ct
Questions:                owner-ct-user@ve7tcp.ampr.org