[ct-user] CT and Kenwood TS570

[Mike Walker]

Hi

Make sure that the baud rate in the TS570, the COMTSR AND the CT-SETUP of
the radio are all the same rate.

Mike-



At 07:13 AM 21/11/97 -0800, Alexander Usachev wrote:
>Hi !
>My call is RA3AF.
>My tranceiver is kenwood TS570.
>I'v got CT9-27 programm, but I have a problem to connect CT with TS570.
>TS570 is connected with computer directly without any additional
>devices and all the commands chould be the same as for TS850, as I
>understood from Kenwood manual. So I choose TS850 in CT menu because
>there is no TS570. But there is no any reaction in my tranceiver when
>I sehd commands from CT ! May be some settings in CT or in TS570 are
>wrong.
>I will appreciate if somebody tell me about operation CT programm with
>TS570. What settings should be made or what programms shold be run
>before ?
>73!
>RA3AF Al. Usachev 117279 Profsoyuznaya 99, 170, Moscow, Russia.
>e-mail:       ra3af@yahoo.com
>
>__________________________________________________________________
>Sent by Yahoo! Mail. Get your free e-mail at http://mail.yahoo.com
>
>--
>Submissions:              ct-user@contesting.com
>Administrative requests:  ct-user-REQUEST@contesting.com
>WWW:                      http://www.contesting.com/ct/
>Questions:                owner-ct-user@contesting.com
>
>
----------------------------------------------------------------
Michael K. Walker                   Legato Systems (Canada) Inc.
Escalation Management                     3390 South Service Road
(905) 637-4738                                    Burlington, ON
http://www.legato.com                                    L7N 3J5
pager:  1480111@pagemart.net

--
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.contesting.com/ct/
Questions:                owner-ct-user@contesting.com