[ct-user] Ver 9.37 CW Keying on LPT port

Sante - IK0HBN Sante - IK0HBN <ik0hbn@isa.it>
Thu, 13 Aug 1998 04:01:33 +0000

At 03.18 13/08/98 +0100, you wrote:
>I'm re-visiting this subject again after a bit more testing. I run
>Version 9.34 on which I have to use the Yaesu FT-1000 radio parameter to
>correctly control an FT-990. Using 9.34, CW keying on the LPT port is
>Version 9.37 corrected the FT-990 radio control situation. However, it
>now unfortunately causes CW keying on the LPT port to become erratic.
>Spacing is off and sometimes it will just send random characters. If I
>remove radio control, keying is OK.
>Just an observation after further testing. For now, I'll stay with 9.34.
>Keith Beebe W3KB
Keith here 9.37 works great on LPT1 and LPT2. If I remember well in last
messages of some weeks ago it resulted being a RF problem over the computer...
Ciao es cu (waiting paddle support on computer...:-))  )
THIS MESSAGE WAS SENT BY:         (.)(.)                    
Sante Lillo, IK0HBN                   | Home  telephone: +39-0761-407543 
Localita' Saineta, 3                  | Fax on request : as above
01030 Bassano in Teverina (VT) Italy  | Cell. telephone: +39-0338-6825052
E-Mail: ik0hbn@isa.it                 | packet: IK0HBN@IK0MIL.ILAZ.ITA.EU
Home Page: <http://www.qsl.net/ik0hbn>| DX cluster : IK0HBN > I0JBL-6

Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.contesting.com/ct/
Questions:                owner-ct-user@contesting.com