[ct-user] System Date Error

[Jim Reisert AD1C]

At 01:40 PM 7/5/99 +0000, Fred W Hoffert wrote:

>1.  Open the "bad" .all file in Wordpad or Notepad
>2.  Edit-replace the 6/22 date of your log with the date that should be
>the first day date, 6/24.  Be sure to use the exact same date format.
>Now your log will show 6/23 and 6/24.
>3.  Edit-replace the 6/23 date of the log with the date that should be
>the second day date, 6/25.  Now your log should show the correct dates
>(6/24-6/25).
>4.  In DOS run R2B (or R2B9, if you are using version 9) on the .all
>file.  This will give you a new .bin file.

The .ALL file is output only, editing the .ALL file will NOT fix anything!

1.  Run B2R9 to make a .RES file from your log
2.  Edit dates in the .RES file and save it.
3.  run R2B9 to covert the .RES back to a .BIN file
4.  Run CT, and perform a WRITELOG to generate a new .ALL file.

Alternatively, use CT_TIME to adjust all the QSOs in the log by a fixed 
time amount, in minutes.  To add two days, the adjustment is 2 x 24 x 60 
(whatever that answer is).

73 - Jim AD1C

--
Jim Reisert AD1C <jjreisert@alum.mit.edu>      http://jjr.ne.mediaone.net/


--
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.contesting.com/ct/
Questions:                owner-ct-user@contesting.com