[ct-user] Serial interface & keying

[bernieg1@mediaone.net]

I don't know about rig control but I have used a single serial port for keying
and communication with a TNC (KAM Plus).  The line used for keying is not
required for the serial communication with the TNC and I made up a cable with
the keying interface in the serial connector hood with a wire coming out to
connect to the keying input on the transciever.  I don't know why the same
approach wouldn't work with rig control, but there may be other issues I'm not
aware of.

Bernie Gardner
W1AZ



>On 10-Jan-00 Waldemar Krzok wrote:
> 
> Hi Folks,
> 
> a few months ago I read on this reflector that someone managed to 
> get rig control and keying on same (serial) port. Both handbook 
> and my experiense sez that this combination does not work.
> I'm using Kenwood TS690 with ct 9.46.
> 
> Waldek, DL7ANQ & SO6ANQ
> 
> --
> Submissions:              ct-user@contesting.com
> Administrative requests:  ct-user-REQUEST@contesting.com
> WWW:                      http://www.k1ea.com/
> Questions:                owner-ct-user@contesting.com


--
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.k1ea.com/
Questions:                owner-ct-user@contesting.com