[ct-user] MFJ tnc problem

[Michael D. Brown]

At 14:02 11/16/2000 +0000, you wrote:
>Number of data bits set properly ?

Yes,  I use:  comtsr1 -b4800 -e71

I tried the -dtr  -rts  and  -xon  also but no luck...
Also tried n81 just to see, but no luck...

73 Mike


>----- Original Message -----
>From: "Michael D. Brown" <mdbrown@iquest.net>
>To: <ct-user@contesting.com>
>Sent: November 16, 2000 2:37 PM
>Subject: [ct-user] MFJ tnc problem
>
>
> >
> > I have a very old MFJ tnc I'm trying to get to work with
> > CT.  It works ok with Log-EQF,  MFJ com, etc.  It is
> > communicating with CT, but there are characters
> > missing in the receive window. I've tried baud rates from
> > 1200-9600 with no change. I've tried 2 different comports
> > also. I'm pretty sure my KPC-3 works ok with CT, but
> > it is at a remote site now used as a link to the cluster.
> > Any ideas ?
> >
> > Thanks...
> >
> > 73 - Mike K9MI
> >
> >
> > --
> > WWW:                      http://www.k1ea.com/
> > Submissions:              ct-user@contesting.com
> > Administrative requests:  ct-user-REQUEST@contesting.com
> > Problems:                 owner-ct-user@contesting.com
> >
> >
> >


--
WWW:                      http://www.k1ea.com/
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
Problems:                 owner-ct-user@contesting.com