Fw: [ct-user] Band "pre-set" in CT V9

[Axel Schernikau]

Dies ist eine mehrteilige Nachricht im MIME-Format.

--Boundary_(ID_9HfkJ/PBGkesMc9SEg5xIA)
Content-type: text/plain; charset=koi8-r
Content-transfer-encoding: 7BIT

Without looking at the current discussion think Pauls wish should be
clear and is a good point of enhancement for one of the next versions:

1. when starting with a new bin-File ofcourse something should be the
band/mode to start with, e.g. 20m CW (both depending on the category
entered).
2. when QSOs where putted in, the program was finished or crashed (or
this "Win..." crashed) the next start should in my opinion just select
band/mode from last QSO entered to use it at the startpoint.
3. another possibility is to write the current position (without having
logged a QSO) of band/mode to a parameter file which could be read on
startup and used to set the data. Thus seems to be good when I changed
from the band of my last QSO to another so I wish to start with the new
band as I'm still searching for Q's.

Ofcourse all plays role only if not connected to the transceiver and the
program doesn't read the current QRG.

Best regards,

Axel Schernikau, DL6KVA
dl6kva@qsl.net

"Jim White, K4OJ" schrieb:
> 
> out of curiosity, what band would you want it to start on...
> 
> Jim, K4OJ
> 
> ----- Original Message -----
> From: <n6rmj@qnet.com>
> To: "N7MAL" <n7mal@citlink.net>; <ct-user@contesting.com>
> Sent: Tuesday, February 26, 2002 7:56 AM
> Subject: Re: Fw: [ct-user] Band "pre-set" in CT V9
> 
> > yes that is what i was looking for
> >
> > maybe next fix can be that
> >
> > n6rmj
> > pat
> >
> > >  I'm beginning to understand why some folks get frustrated with this
> > >  reflector.
> > >  I think the 'answer' to your question is no. Every piece of software
> has to
> > >  start in some condition, CT starts default to 20 meters. I've never
> seen in
> > >  writing, anywhere, a way to change that.
> > >  Hope this actually answers your question.
> > >
> > >  MAL               N7MAL
> > >  BULLHEAD CITY, AZ
> > >  http://www.ctaz.com/~suzyq/N7mal.htm
> > >
> > > > ----- Original Message -----
> > > > From: "Paul Beshlian" <paul.beshlian@verizon.net>
> > > > To: <CT-USER@contesting.com>
> > > > Sent: Saturday, February 23, 2002 23:20
> > > > Subject: [ct-user] Band "pre-set" in CT V9
> > > >
> > > >
> > > > > Is there a way (in the config file, command line...) to get CT V9 to
> > > > > start in a band other than 20?  I must have missed something,
> > > > > somewhere...
> > > > > (Replies 'off-net' to kc2cjw@arrl.net are okay...)
> > > > >
> > > > > _______________________________________________
> > > > > ct-user mailing list
> > > > > ct-user@contesting.com
> > > > > ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
> > > > > http://lists.contesting.com/mailman/listinfo/ct-user
> > > > >
> > > > >
> > > >
> > >
> > > _______________________________________________
> > > ct-user mailing list
> > > ct-user@contesting.com
> > > ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
> > > http://lists.contesting.com/mailman/listinfo/ct-user
> > >
> >
> >
> > _______________________________________________
> > ct-user mailing list
> > ct-user@contesting.com
> > ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
> > http://lists.contesting.com/mailman/listinfo/ct-user
> 
> _______________________________________________
> ct-user mailing list
> ct-user@contesting.com
> ct-user-request@contesting.com Subject=unsubscribe to unsubscribe
> http://lists.contesting.com/mailman/listinfo/ct-user

--Boundary_(ID_9HfkJ/PBGkesMc9SEg5xIA)
Content-type: text/x-vcard; charset=koi8-r; name=Axel.Schernikau.vcf
Content-transfer-encoding: 7BIT
Content-disposition: attachment; filename=Axel.Schernikau.vcf
Content-description: Visitenkarte =?UNKNOWN?Q?f=FCr?= Axel Schernikau

begin:vcard 
n:Schernikau;Axel
tel;fax:++49-0381-25 24 5 99
tel;work:++49-0381-25 24 0
x-mozilla-html:FALSE
url:www.siv.de
org:SIV AG;Anwendungsentwicklung
adr:;;Konrad-Zuse-Str. 1;Rostock-Roggentin;;18184;
version:2.1
email;internet:Axel.Schernikau@siv.de
title:Dipl.-Ing.
fn:Axel Schernikau
end:vcard

--Boundary_(ID_9HfkJ/PBGkesMc9SEg5xIA)--