[ct-user] CTWin & Telnet spots

[David Robbins]

Turn off dxtelnet.  Configure tnc as 'telnet' in ct setup screen.  after
ct starts do alt-t to open the cluster window and hit enter, it will
prompt for the address to telnet to, enter that and hit enter... done.



David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
 

> -----Original Message-----
> From: ct-user-admin@contesting.com
[mailto:ct-user-admin@contesting.com]
> On Behalf Of Axel.Schernikau
> Sent: Thursday, November 21, 2002 21:17
> To: CT-User@contesting.com
> Subject: [ct-user] CTWin & Telnet spots
> 
> Hello,
> 
> probably an easy question for the real contesters on the list.
> 
> I'm using a Win2k-laptop running CTWin and DX-Telnet.
> Getting DX-spots in DX-Telnet via Internet-Connection using DSL over
the
> network card.
> 
> I'm not trying to build a network of several PCs, just wont to get the
> spots from the Telnet-connection into CT to use spot-features of CT.
Any
> suggestions who to do this (including configurations) are welcome.
> Haven't found anything on this only a few hints to connect DOS-PC and
> Win-PC etc.
> 
> Thanks a lot.
> 
> Wish all good luck in the WW DX.
> 
> Axel Schernikau, DL6KVA
> dl6kva@qsl.net
> 
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> CT-User-request@contesting.com Subject=unsubscribe to unsubscribe
> http://lists.contesting.com/mailman/listinfo/ct-user