[ct-user] CT networking questions

[John Bednar]

Mike,

I have seen the crashing on first QSO problem with
DOS CT versions within the last two years (maybe a little
longer) but I was running DOS on all computers. I was
using serial com port networking between computers.
If I remember correctly, I removed all memory management
programs and this solved the problem.

John
k3ct@fast.net


----- Original Message -----
From: "Mikko, OH4XX" <mikkop@raketti.net>
To: <ct-user@contesting.com>
Sent: Saturday, October 05, 2002 3:20 AM
Subject: Re: [ct-user] CT networking questions


> Hi all,
>
> We had same problem with OH6LNI when we tried to use telnet (with PC
running
> win2000pro) We tried same tricks what Ronald with no luck. We could not
get
> telnet working even I could see with my monitoring SW that connection was
> established for a moment but then it was disconnected and  same error
> message "could not establish connection" came. As it is now we have not
find
> any solution only than switch to Win98se or use dxtelnet
> (http://lists.contesting.com/_ct-user/2002-September/006771.html) for
spots.
> So it is little bit strange that you can telnet to your localhost ip but
not
> any internet ip?
>
>  Another issue we had with win2000pro is that while two computers were in
> network CTwin crashed immidiately after 1st qso entered from another
PC..Any
> tips how to get these working are welcome.
>
> 73,
>
> Mikko OH4XX
>
>
>
> ----- Original Message -----
> From: "Ronald Stuy, PA3EWP" <rstuy1@chello.nl>
> To: "David Robbins" <k1ttt@arrl.net>
> Cc: <ct-user@contesting.com>
> Sent: Friday, October 04, 2002 2:16 PM
> Subject: RE: [ct-user] CT networking questions
>
>
> > Hello David,
> >
> > Thanks for you answer.
> > That is just the point, it won't work.
> > I tried it on name and also on ip address.
> > I put the name/ip address in the host file to be sure that wasn't the
> > problem.
> >
> > Looking with an analyser on the network, I don't see any data from the
> > telnet session on the network.
> >
> > Ronald
> >
> >
> >
> > -----Original Message-----
> > From: David Robbins [mailto:k1ttt@arrl.net]
> > Sent: Friday, October 04, 2002 10:55 AM
> > To: 'Ronald Stuy, PA3EWP'
> > Subject: RE: [ct-user] CT networking questions
> >
> >
> > After starting ct do alt-t to put your cursor in the packet window.  Hit
> > enter and you should get a box where you enter the ip address of the
> > cluster node you want to connect to.  I'm not sure if the name works
> > (like k1ttt.net), but the numeric ip address does.  After entering the
> > address hit enter and it should connect.
> >
> >
> > David Robbins K1TTT
> > e-mail: mailto:k1ttt@arrl.net
> > web: http://www.k1ttt.net
> > AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> >
> >
> > > -----Original Message-----
> > > From: ct-user-admin@contesting.com
> > [mailto:ct-user-admin@contesting.com]
> > > On Behalf Of Ronald Stuy, PA3EWP
> > > Sent: Thursday, October 03, 2002 18:56
> > > To: ct-user@contesting.com
> > > Subject: [ct-user] CT networking questions
> > >
> > > Hello,
> > >
> > > For our upcoming DX-pedition and CQ WW SSB contest I am configuring my
> > > laptops.
> > > But I have a few problems.
> > >
> > > I am working with CTWIN 9.77 on 2 PC's running W2000.
> > > Networkings seems to work well, communications between both PC's are
> > ok.
> > > But it is impossible to make a telnet connection to a DX-cluster from
> > CT.
> > >
> > > In the setup I configured TNC: TELNET
> > >
> > > After approx. 20 seconds I get the messages: Could not open: <ip
> > address>
> > >
> > > Making a telnet connection from another window, it works fine.
> > >
> > > I hope somebody can help me.
> > >
> > > 73 Ronald
> > >
> > >
> > >
> > > Ronald Stuy, PA3EWP
> > >
> > > member:
> > > PI4COM (Contestgroup Oude Maas)
> > > http://www.qsl.net/pi4com
> > >
> > > LLDXT (Low Land DX-pedition Team)
> > > http://www.qsl.net/lldxt/index.html
> > >
> > >
> > >
> > > _______________________________________________
> > > CT-User mailing list
> > > CT-User@contesting.com
> > > CT-User-request@contesting.com Subject=unsubscribe to unsubscribe
> > > http://lists.contesting.com/mailman/listinfo/ct-user
> >
> >
> > _______________________________________________
> > CT-User mailing list
> > CT-User@contesting.com
> > CT-User-request@contesting.com Subject=unsubscribe to unsubscribe
> > http://lists.contesting.com/mailman/listinfo/ct-user
>
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> CT-User-request@contesting.com Subject=unsubscribe to unsubscribe
> http://lists.contesting.com/mailman/listinfo/ct-user
>
>