[ct-user] networking ctwin and ct/dos

[David Robbins]

Ok, it does seem to work.  There are two things to watch out for. 

First in starting ctwin the shortcut must look like this if you install
in the default location:
"G:\Program Files\K1EA Software\CtWin\ctwin.exe" -enet
note that -enet comes outside the quotes.  This is a windows thing
because the path has spaces in it.

In starting nettsr use a command line like:
Nettsr 192.168.0.80 100 0.0.0.0 3030 255.255.255.255
The parameters are:
192.168.0.80 = the ip address for the dos machine, this must be
different for each machine on the network of course.
100 = default sw interrupt to emulate comtsr4
0.0.0.0 = broadcast mask.  Will actually be ignored in this setup
3030 = port used by ctwin with -enet for networking
255.255.255.255 = broadcast address used by ctwin for networking




David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net