[ct-user] CT remote control of TS930S w/PIEXX upgrade

Leeson leeson at earthlink.net
Sat Dec 2 12:21:17 EST 2006

During our recent CQWW CW opeation, I did note that the TS-930/Piexx 
setting seems broken. I've found that the TS-850 setting seems to work 
fine. Give that a try.

The COMTSR switches for the COM port COM[n] you connect to the radio 
should be COMTSR[n] -b4800 -n82

Dave, W6NL/HC8L

Jim Dicso wrote:

> Date: Sat, 2 Dec 2006 10:58:28 -0500
> From: "Jim Dicso" <dicso123 at hotmail.com>
> Subject: [ct-user] CT remote control of TS930S w/PIEXX upgrade
> To: <ct-user at contesting.com>
> Message-ID: <BAY111-DAV7A76AEF2D072A2D2763738DD90 at phx.gbl>
> Content-Type: text/plain;	charset="iso-8859-1"
> CT locks up (cannot change bands or enter QSOs, among other problems)  when connected to a TS930S upgraded with PIEXX digital board.    I tried with CT (v9 & v10) and CTWIN on two different PCs.    
> PIEXX (Chris Seig) helped verify that the interface is working using Hyperterminal  (which confirmed the correct port settings).
> In addition, RCP570 (radio control program for TS570) running on a laptop works very well with the TS930/PIEXX.
> I would appreciate  help with the setup of either CT or CTWIN or both to allow communication and CW keying (CT only) through the serial port.   The PC runs Win98 (2 serial ports) and laptop runs WIN XP (1 serial port) 
> Thanks,
> Jim K2SZ      

More information about the CT-User mailing list