[ct-user] Adding a Windows WINCT computer to DOS CT Network

[Hank Kohl K8DD]

CTWin uses port 3030 so you have to change the nettsr to that port on
the CT DOS PCs from the default port.

I have always set up the IP address's with DOS as 10.0.0.<band>

It has been written on the reflector that wireless networks lose packets
(log entries) and wired networks don't.  However I tried an infrastructure
wireless network and it seemed to work fine for about 10 minutes pounding
on three keyboards at a time.

73    Hank    K8DD


Mark Bailey wrote:
> Good afternoon, all:
>
> I need to add a WinCT box to our existing DOS CT network
> so that I can easily use telnet to get packet spots.
> There is a statement in the CT_additions section about
>
> "CT Win can be used in an Ethernet network with other
> computers running CT DOS and K1TTT’s nettsr. The K1TTT
> nettsr information and files are available on the CT
> web page. When networking CT DOS and CT Win computers
> with Ethernet, some changes must be made to the CT DOS
> nettsr startup command or Ethernet linking will not
> work. Using the same version of CT is advisable on
> all computers."  I can't find out what this is.
>
> Do I have to do anything other than assign the Windows
> box a compatible static IP address?  It will actually
> use a wireless connection for the internet connection
> and a wired connection for the network.
>
> How do I tell CT Win which network interface to use?
>
> Thanks and 73,
>
> Mark, KD4D
>
>
> _______________________________________________
> CT-User mailing list
> CT-User at contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
> CT on the web:  http://www.k1ea.com/
>
> .
>
>