[ct-user] PACKET

[N7MAL]

Charlie here is the problem: I want to connect CT to the loopback port 
utilized in the VE7CC software. I have 2 different logbook programs that 
have no problem with this connection but CT gives an error "can't connect". 
Here are the VE7CC instructions and as I said it works very well.

With the setup shown, the program is waiting for incoming connections from 
logging programs on port 7300. If the logging program is running in the same 
machine, use the local telnet loopback port (127.0.0.1 :7300). If the 
logging program is in a different machine, telnet to this machines IP 
address at port 7300. The number of logging program connections is 
unlimited. To enable or disable this feature, you need to go to 
"Configuration>Ports/Logging Program>Logging Program Connection>Telnet".




MAL
N7MAL
BULLHEAD CITY, AZ
http://www.ctaz.com/~suzyq/N7mal.htm

  ----- Original Message ----- 
  From: charlie carroll
  To: N7MAL
  Sent: Saturday, January 27, 2007 14:12
  Subject: Re: [ct-user] PACKET


  Mal:
  I'll try to help, but some of what you say is confusing to me.

  What cluster node are you connecting to?
  Are you doing this via the normal CT connect method?
  Are you running a DXSpider node on the same PC as you are running CT?

  73 charlie, k1xx/4



  -- 
  No virus found in this incoming message.
  Checked by AVG Free Edition.
  Version: 7.1.410 / Virus Database: 268.17.12/653 - Release Date: 1/26/2007