[ct-user] CT PORT/BAUD SETTINGS FOR ELECRAFT K3

[Dennis Vernacchia]

Did you set the baud rate in one of the K3 Menus

If that don't work, download lates ver 10 and K3 is in list pf rigs

Works fine on my K3 with CT ver 10

73, Dennis n6KI

On Thu, Nov 5, 2009 at 8:59 AM, Missouri Guy <n0tt1 at juno.com> wrote:

> Hi Gents,
>
> I'm trying to let CT V9.x communicate with my Electraft K3 radio
> when I want to change bands, either by changing the band
> with the radio or with the computer ( {ALT}F1 or F2).
>
> I'm using a my trusty DOS notebook computer, a Gateway
> Colorbook.  COMTSR1 is running and specified to
> communicate at 4800 baud.  No port conflicts that I know about.
> The radio1 selected in the CT setup is TS-50.
> The PORT setup in CT is: COM1  4800  RADIO1
>
> I'm using a standard RS-232 cord between the radio's RS232 port
> and the COM port on my computer.  Wrong cord?
>
> Is there something else I should change or setup?
>
> Thanks,
> Charlie, N0TT
> _______________________________________________
> CT-User mailing list
> CT-User at contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
> CT on the web:  http://www.k1ea.com/
>