[Fourlanders] Writelog version10.42b broken

[Neal Sulmeyer]

Thanks to Brian, I read the documentation.  The "setup VHF transverter
offsets" from the menu does not set the offsets correctly!  You must go into
your writelog.ini file and set the offsets manually.  Then all works as
before.  You must still set the frequency once manually.  You can now do
this by entering the frequency in the "Call" field (e.g. 144200) and
pressing ENTER.  You no longer have to bring up small form to do this.

Neal Sulmeyer, K4EA
K4EA at CONTESTING.COM
K4EA at SVHFS.ORG

-----Original Message-----
From: Brian McCarthy [mailto:rfacres at akorn.net]
Sent: Friday, September 05, 2003 11:21 PM
To: k4ea at contesting.com
Subject: Re: [Fourlanders] Writelog version10.42b broken

You did change your settings? The release notes for this new version
changed the scale and made decimal etries possible. It implies that you
should be able to correct the offset we were seeing in June of about 0.6kc.

This new version smooths out a couple of things for me. Not required,
but better.

Later,
Brian

Neal Sulmeyer wrote:

>I just downloaded the latest version and found that when using transverter
>offsets, writelog will not or set the vfo frequency and the frequency
>display in writelog is messed up.  I have tried this with my FT990 and
>FT1000mp with the same results.  Please test this with your
>radios/computers.  We may have to go back to using version 10.41C
>
>Neal Sulmeyer, K4EA
>K4EA at CONTESTING.COM
>K4EA at SVHFS.ORG
>
>
>_______________________________________________
>Fourlanders mailing list
>Fourlanders at contesting.com
>http://lists.contesting.com/mailman/listinfo/fourlanders
>
>
>
>