[Fourlanders] Need Some Help

[Jim Worsham]

Sorry, I should have been more clear/correct.  The original power supply was
inline not a wall wart.  It wasn't very large though so I suspect it is a
switching power supply.  Another, similar inline supply would also be OK.

73
Jim, W4KXY

-----Original Message-----
From: fourlanders-bounces at contesting.com
[mailto:fourlanders-bounces at contesting.com] On Behalf Of Brian McCarthy
Sent: Sunday, November 11, 2007 11:19 PM
To: fourlanders at contesting.com
Subject: Re: [Fourlanders] Need Some Help

4.2 amps!?!? That's a pretty stout "wall wart". Most of them run no more
than about 1-1.5 amps. I've seen inline supplies in that wattage range, but
not a wall wart style.

Sorry,
Brian
NX9O

On Nov 11, 2007 7:21 PM, Jim Worsham <wa4kxy at bellsouth.net> wrote:
> I have an LCD Display that the power supply (wall wart) has gone bad.  
> The display itself works fine.  I would like to find another power 
> supply (wall
> wart) so I can use it for the DMU2000 spectrum scope display with the 
> FT2000.  It needs 12 VDC at 4.2 Amps.  I know that I could probably 
> just run it off of a regulated power supply and I may end up doing 
> that but I would like to try to see if I can find another wall wart.  
> Can everyone look in their junk box and see if they have something that
might work?  Thanks.
>
> 73
> Jim, W4KXY
>
>
> _______________________________________________
> Fourlanders mailing list
> Fourlanders at contesting.com
> http://lists.contesting.com/mailman/listinfo/fourlanders
>
_______________________________________________
Fourlanders mailing list
Fourlanders at contesting.com
http://lists.contesting.com/mailman/listinfo/fourlanders