[Mldxcc] Fw: [NCCC] run frequency monitoring

[Robert Hess]

For those of you who may not have seen this, it works well.  Very useful in the 10 meter contest.  I've got to ask Matt if this works with RTTY too.  
By the way, if you operate RTTY or CW Assisted, be sure to turn on the Skimmer spots.  Your band-map will light up in seconds.  
If you're running, always send "Test" or "CQ" to trigger the Skimmer......ie: "TEST W1RH"...."CQ SS W1RH"
bOB
     ----- Forwarded Message -----
 From: Matt Murphy <matt at nq6n.com>
 To: NCCC <nccc at contesting.com> 
 Sent: Thursday, December 10, 2015 6:24 PM
 Subject: [NCCC] run frequency monitoring
   
Hey everyone just wanted to share a link to something I created the other morning:
It's a remote pan adapter for CW, so you can see what the passband centered on your run frequency "looks" like in NA, EU, etc.  The inputs are: 1)  Your call2)  The band you are running on3)  The 'passband' you'd like to examine (plus/minus 0.25 to 4.25 kHz) 4)  The continent for which you'd like to see RBN spots
The output is a graphical 'pan-adaptor' type display of spotted stations within the selected passband.  This is handy in contests as you don't have to leave your pileup to see what stations are near your run frequency. The run frqeuency monitor is located at: www.nq6n.com/run-frequency

73,
Matt NQ6N
_______________________________________________
NCCC mailing list
THIS EMAIL LIST IS A NO-FLAME ZONE! See guidelines at:
http://lists.contesting.com/mailman/listinfo/nccc
Post to: nccc at contesting.com (never publish this address)
Manage your subscription at: http://lists.contesting.com/mailman/options/nccc
Archives at: http://lists.contesting.com/mailman/private/nccc/

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/mldxcc/attachments/20151214/c5ec47b2/attachment.html>