[Mldxcc] [NCCC] Rotor Stuck - Advice Needed

Alan Maenchen ad6e at arrl.net
Wed Jan 20 18:31:37 EST 2016


Good job!

I forgot about that "rocking" trick. Glad it worked.

That said, it's going to happen again unless you do something about it.
Years ago, I had similar problems with a TailTwister. I tried several
things but it never got the reliability I wanted. Replaced it with a Yaesu
1000 and have not had a single problem since.

YMMV ...

73, Alan  AD6E



On Wed, Jan 20, 2016 at 1:14 PM, Jim Venneman <wx6v at sbcglobal.net> wrote:

> Hi Bob,
>
> Wow - thanks for that tip!  I did what you suggested and after about ten
> tries - the rotor started working again.
>
> This rotor has been up in the tower since November of 2005 and this is the
> first time that I have ever had an issue with it.
>
> I'm back in business again. Woo-hoo! Now - back to VP8STI :>)
>
> de Jim  -WX6V-
>
>
> --------------------------------------------
> On Wed, 1/20/16, Bob Moore <ki6iv at sbcglobal.net> wrote:
>
>  Subject: Re: [NCCC] Rotor Stuck - Advice Needed
>  To: "Jim Venneman" <wx6v at sbcglobal.net>
>  Date: Wednesday, January 20, 2016, 2:08 PM
>
>
>      Jim   -  Release the brake by pushing
>  middle button,
>        attempt to rock the rotor back and forth with the 2
>  outer
>        buttons.  These rotors are known to have them get
>  hung up with the
>        brake,  Mine acts ovvassionally, that is how I get it
>        released....................Bob,,, K6NV
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>      On 1/20/2016 12:05 PM,
>  Jim Venneman
>        wrote:
>
>
>
>        This morning - my CDE HAM IV rotor stuck at 30
>  degrees and won't move in either direction. I opened up
>  the Owner's Manual and ran all of the voltage and
>  resistance checks and everything checks out OK. Any ideas on
>  what to do next would be appreciated.
>
>  To make matters worse - I can't lower the tower when it
>  is at 30 degrees because the 40 meter rotable will get hung
>  up in my neighbor's big Oak tree.
>
>  Ideas?
>
>  Thanks,
>
>  Jim  -WX6V-
>  _______________________________________________
>  NCCC mailing list
>  THIS EMAIL LIST IS A NO-FLAME ZONE! See guidelines at:
>  http://lists.contesting.com/mailman/listinfo/nccc
>  Post to: nccc at contesting.com
>  (never publish this address)
>  Manage your subscription at:
> http://lists.contesting.com/mailman/options/nccc
>  Archives at: http://lists.contesting.com/mailman/private/nccc/
>
>
>
>
>
>
> _______________________________________________
> NCCC mailing list
> THIS EMAIL LIST IS A NO-FLAME ZONE! See guidelines at:
> http://lists.contesting.com/mailman/listinfo/nccc
> Post to: nccc at contesting.com (never publish this address)
> Manage your subscription at:
> http://lists.contesting.com/mailman/options/nccc
> Archives at: http://lists.contesting.com/mailman/private/nccc/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/mldxcc/attachments/20160120/2a68c7ca/attachment-0001.html>


More information about the Mldxcc mailing list