[na-user] W9XT card and 10.35

[Tad Danley, K3TD]

Greg Clark wrote:

> Tad
>
> I've seen this when the keyer has no message recorded for the specifed
> message.  Did you record a message under NA or are you relying on the
> DVRC setup??  I would suggest that you record under NA and then see what
> happens.

Thanks for the suggestion.  When I try to record from NA using "Shift+F1", the
message in the bottom left of the screen says "Contest Card not ready to
record".  I guess this is the problem, but any ideas on how to correct it?


> Also, make sure you specify W9XT card in the voice keyer area....not one
> of the other choices.
>
> 73/Greg
> K9IG

I verified that W9XT is selected.


> Tad Danley, K3TD wrote:
> >
> > Need some help, please !
> >
> > Installed the W9XT card in my pc and set it up using the DVRC program to
> > identify the LPT port (#2) and program the four messages.  It works
> > great and keys the transmitter fine.
> >
> > Then I configured NA 10.35 and told it I have the W9XT card and that it
> > is on LPT2.  I went to the EQUIPMENT screen and told NA a DVK was
> > installed, and the status bar indicates "VoiceKeyer ON".  When I hit F1,
> > the bottom left of the screen displays "VoiceKeyer Message 1" for a few
> > seconds, but the rig does not key.
> >
> > Any help will be greatly appreciated - THANKS and 73,
> > --
> > Tad Danley, K3TD

--
Tad Danley, K3TD
mailto:tadanley@mindspring.com

TRA 4501, TARA 18, NAR 14020
For amateur radio contesting try http://www.contesting.com
For high power rocketry try http://www.rocketryonline.com



--
Submissions:              na-user@contesting.com
Administrative requests:  na-user-REQUEST@contesting.com
WWW:                      http://www.contesting.com/datom/
Questions:                owner-na-user@contesting.com