[na-user] NA with Internet connection?

[The Tolberts]

Dave: I don't think it matters how you connect to the internet; if you only
have one com port with the loopback plug installed the flow is one way, from
DXTelnet into NA ( or CT). If you have 2 free com ports and a null modem
cable you can have 2 way communication. Assign one port in DXTelnet as the
AUXCOMM and set the other up in NA ( making sure the baudrate, etc
matches). I have an Ethernet connection to a DSL modem and only one free
port; using the loopback plug I only have one way (DXT>>NA) communications.
As soon as I get the other ports installed I'll double check the 2 way talk.

73 Jamie WW3S

----- Original Message -----
From: "k8cc" <k8cc@mediaone.net>
To: "The Tolberts" <jtolbert@gremlan.org>; "Jeff Maass"
<jmaass@columbus.rr.com>
Cc: <na-user@contesting.com>
Sent: Tuesday, November 28, 2000 10:25 PM
Subject: Re: [na-user] NA with Internet connection?


> At 05:51 PM 11/28/00 -0500, The Tolberts wrote:
> >Not cockpit error, thats the limitations of the DXTelent when used with a
> >single com port. With 2 ports you can also send spots.
>
> You are presuming (in error) that the Internet connection is via a serial
> port (dial up connection).  In our case, this is not true.  With an
> Ethernet connection (to a cable modem) only one COM port should be needed.
>
>
> Dave/K8CC
>


--
Submissions:              na-user@contesting.com
Administrative requests:  na-user-REQUEST@contesting.com
WWW:                      http://datom.contesting.com/
Questions:                owner-na-user@contesting.com