[NA-User] NA 10.53 and Packet

[Ray C Fallen]

Hi...

Thanks for reading this.  I'm using 10.53 and an MFJ-1278 Packet Modem.
In order to initialize the modem in command mode while using 10.53, I
have to
power off the modem and turn it back on again to get the CMD: prompt. 
Pressing control and C doesn't seem to work.

This can be a pain as I get disconnected on busy weeekends.

The packet works fine (the control and C works) using DXBase for DOS 5.0.

Any ideas?

Ray
Youngstown, Ohio