[NA-User] Two Questions

[Hank Kohl K8DD]

#1  I've had that happen running NA in a Command Prompt / DOS Window / 
DOS Shell with Win 95, 98, NT and 2000 but not when I boot straight to 
a Command Prompt or boot from a DOS 6.22 floppy and then switch to the 
hard drive to run NA.  Even with 4000+ QSO's in the log for ARRL DX 
from the DX side.

#2  Dunno - haven't messed with 2 radios.


At 07:45 PM 10/1/2001 -0500, Jim George wrote:
>#1.  The CW as sent by the paddle input for NA seems to become quite 
>choppy
>and uneven after the QSO database builds up.  Is this a by-product of a
>computer which is unable to handle the program and sent paddle CW
>concurrently?  In my case, with my 486DX-66, the problem is so bad that I
>do not use the paddle CW any longer, and use my KC Keyers instead in the
>SO2R configuration.
>
>#2.  I decided to set up the Texas QSO Party (TQP) on NA 10.52, and play
>around a bit Sunday, but found that the program crashes after the screen
>with the configuration setup for "2 radios, radio 1, radio 2, keyer, tnc,
>etc." is completed and I try to return to the main screen.  The error
>message reads "Error 07 occurred in module NA1052 at address 
>398A:0DC6.  I
>downloaded NA 1053 and it did the same thing.  Is this a failure in 
>the NA
>TQP program, or am I doing something wrong?  All my other contest
>configurations work normally (WPX, CQWW, ARRL, IARU, etc.)
>
>Thanks,
>
>Jim George N3BB/5
>
>
>_______________________________________________
>NA-User mailing list
>NA-User@contesting.com
>http://lists.contesting.com/mailman/listinfo/na-user

*/     Hank Kohl  K8DD      k8dd@arrl.net
*/     ARRL TS              http://www.qsl.net/k8dd
*/     MI-QRP - Vice Pres.  QRP-ARCI - Director
*/