[Orion] RIT/XIT in Orion

[Grant Youngman]

> After engaging the XIT and setting the offset, I turned on 
> the RIT but the offset is 0, not the offset already set with 
> the XIT.  When I turn the RIT knob the XIT moves along with 
> the RIT, maintaining a difference between transmit and 
> receive frequencies.

RIT and XIT are independent, as though you had two separate controls.  You
can, however, lock them a fixed offset from each other by pressing both XIT
and RIT and the same time.

Grant/NQ5T