[Orion] Orion 565 with DX4WIN

[Duane A Calvin]

Hello Milan,
        I'm using DX4WIN with my Orion.  It works properly, as you note. 
If the DX station is working simplex, then your rig will be set with VFO
A on his freq, and both RX and TX assigned to it.  This should be
correct, and it is how every other rig I've had gets set for simplex.  If
he is working offset, and the spot indicates it, DX4WIN will set VFO A to
his frequency, and will set VFO B to his QSX, as well as switching the TX
to VFO B.  So, I think what you are describing matches what I have just
described, and it's the normal setup for each condition.  Let us know how
you think it should be different, in case I'm missing something.

        73,  Duane


On Mon, 7 Mar 2005 00:46:44 +0100
=?windows-1250?Q?Milan_G=FCtter=2C_OK1FM?= <ok1fm at ges.cz> writes:
> Hi OMs,
> 
> Who is using TEN-TEC ORION 565AT (ORION 565)
> controlled by DX4WIN6.04 ?
> 
> I need to know how set the DX4WIN Radio Database
> that both displayed frequencies at ORION
> (A and B) change when click on a DX spot.
> 
> At present, when click on a DX4WIN DX spot, 
> only the upper ORION (A) frequency goes
> to the DX spot frequency. 
> 
> The lower frequency (B) stay at previous QRG.
> (When a QSX is given by DX spot, the lower 
> (B) display works right, the right QSX frequency is set)
> 
> Who can help?
> 
> 73 Milan, OK1FM
> ok1fm at ges.cz
> 
> 
> 
> 
> 


--------------------------------------
Duane Calvin, AC5AA
Austin, Texas

http://home.austin.rr.com/ac5aa