[RFI] Computer RFI problem

[Cortland Richmond]

Check out the drawing at 

http://www.cableone.net/ctj92/index.html?row1col2=r7.html

Did you keep the "radials" away from the coax" Coupling from the 
coax to that point can couple noise on the coax into the 
antenna.  The impedance at the radials is highest (and coupling
is easiest) on 20 meters.

The WORST case is if you grounded those "radials." As you can see
from the diagram, that shorts out the built-in choke balun.

See my previous message for why this is bad thing to do.

Cortland


> also been replaced and is very quiet.  What I don't get is why 1) I didn't
> have the problem with the previous R7 and now do with the R7000 and 2) why