[RFI] toroids

[Tom Horton]

Thanks to all the guys for all the answers...
Seems that for my purposes, it's a whole lot easier than I thought.
73 and thanks again.
Tom K5IID

Cortland Richmond <ka5s at earthlink.net> wrote:
GOOD topic!

I like Tom's approach myself; it's easy to do. Some of the folks I've worked with (and for) require more. And the impedance in a fixture is not a CERTAIN predictor of performance on a wire; I've demonstrated this on occasion, where beads had to be moved to a higher-current part of a wire a quarter wavelength further away.

Cortland

-----Original Message-----
From: Tom Rauch 
Sent: Aug 15, 2004 3:15 AM

You don't need to know the manufacturer OR the mix, all you need to know is the impedance.

_______________________________________________
RFI mailing list
RFI at contesting.com
http://lists.contesting.com/mailman/listinfo/rfi


Tom Horton  K5IID
 Hillsboro, TX


 USA-CA All Counties 661---DXCC---5 BAND DXCC
 WPX HONOR ROLL---5 BAND WAC---WAZ

 Finally back home in Texas after all these years! 

"E" sorter for the ARRL W5 QSL bureau