[RFI] Ferrite Beads

[Dennis Berry]

Good idea.  Try the old aluminum foil wrap, copper tape, grounding sheath
idea and see if that makes a difference.  I remember when I used to watch
the EMC guys prepare systems for test, they had aluminum foil wrapped all
over the wiring on an engine.  (Jet engine, but similar principle I'm sure).

    Dennis


> Ford Peterson wrote:
>
> > The harness leading to the COPs is a buzz of noise.  It all starts
> > with each COP and the noise adds all along the length of the harness
> > back to the engine controller.  It is the most intense at the COPs.
>
> Have you tried wrapping the harness in conductive tape and grounding it?
>
> Sounds like too much fun.  :-(
>
> michael N6CHV
>
>
> _______________________________________________
> RFI mailing list
> RFI at contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>