[RFI] Update on the Boston area RFI

[Missouri Guy]

> NStar did come out last week with their Radar Engineering VHF/UHF  
> gear with a yagi for pinpointing the noise. The noise was so high  
> along the power lines they could not pinpoint a specific pole or 
> spot....

It sounds like they needed some attenuation in front of the
receiver.  With my own RFI radio, I use 6 -10 -20 db switchable
steps between the antenna and radio, and sometimes that's 
not enough when close to a noise source.

73, 
Charlie, N0TT