[RFI] HomePlug Experience?

[K1TTT]

I was afraid of that also when I put in a pv system.  The pv inverters talk
to a monitoring box using 144khz plc which is very narrow band and no
problem.  But because of the limited range the monitoring box had to be too
far from my router, so the company sent me a pair of homeplug bridges.  They
are supposed to be 4-20MHz, but I can't hear them.  Perhaps this is only
because of the relatively low data rate and intermittent transfers actually
used, but they don't seem to be a problem here.


David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
 

> -----Original Message-----
> From: Ian White GM3SEK [mailto:gm3sek at ifwtech.co.uk]
> Sent: Friday, July 16, 2010 07:09
> To: rfi at contesting.com
> Subject: Re: [RFI] HomePlug Experience?
> 
> Eric Rosenberg wrote:
> >  It looks like I'll need HomePlug to get from my router in the basement
> >to the second floor, as no wireless devices penetrate this 70-year old
> >plaster and lathing house.
> >
> >I presently have five Ethernet runs in the basement and two to the main
> >floor above the shack.  They don't appear to be noisy or have an impact
> >on my urban station.
> >
> >Do any of you have experience with HomePlug in/near the shack?
> >
> >I'd like to know about your experience!
> 
> http://www.ukqrm.org/
> 
> Welcome to HF Hell.
> 
> 
> --
> 
> 73 from Ian GM3SEK
> http://www.ifwtech.co.uk/g3sek
> _______________________________________________
> RFI mailing list
> RFI at contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi