[RFI] VDSL (very-high-bit-rate digital subscriber line)

qrv at kd4e.com qrv at kd4e.com
Sun Apr 20 14:45:55 EDT 2014


Is it that they use a better fiber-to-copper converter at the street,
then split the lines to the homes, rather than running fiber to each
house & using a poorer quality converter?

I'm trying to understand the reason for interrupting the fiber prior
to the run from the street to each house.
David KD4E

> I have Frontier 6 Mbs DSL - Fiber to the DSLAM (Digital Subscriber Line
> Access Multiplexer) then buried copper pair to the house Network
> Interface, CAT-3 pairs to the ADSL-2 modem, router, and wi-fi gateway.
> The Netgear 7550 DSL modem sits in the shack. Thus far there has been no
> evidence of RFI to or from the Netgear 7550.
>
> A search on VDSL
> (http://en.wikipedia.org/wiki/Very-high-bit-rate_digital_subscriber_line) shows
> that Bloomington IL is a market where 40 Mbit/sec downstream and 10
> Mbit/sec upstream is available.  In all cases the length of the copper
> path from the DSLAM, the equipment terminating the copper pairs at the
> DSLAM and at the subscriber location will ultimately determine line
> quality and downsteam / upstream speeds.
>
>
> 73 & DX,
> Gary - AB9M
>
> -----Original Message----- From: Dale J.
> Sent: Saturday, April 19, 2014 3:32 PM
> To: qrv at kd4e.com
> Cc: RFI
> Subject: Re: [RFI] VDSL (very-high-bit-rate digital subscriber line)
>
> I'm not sure myself, but I believe the fiber cable is someplace else
> from this street and it's converted in some way from fiber to copper
> phone line then routed to the house or use existing phone wiring.  But
> I'm not sure if I have that right.  Maybe someone else has better
> information.
>
> Dale, k9vuj
>
>
>
> On 19, Apr 2014, at 15:19, qrv at kd4e.com wrote:
>
>> What's the difference between VDSL & DSL?
>>
>> We have fiber-DSL to the exterior of our home then it's converted
>> in a box prior to entry.
>>
>> Why would they do it differently than that?
>>
>> David KD4E
>>
>>> Anybody have VDSL service to their home?  I did a quick lookup and it
>>> uses copper to the home at frequency band 25 Khz to 25 Mhz.  My next
>>> door just signed up for it.  I wonder if that will be my next
>>> challenge.
>>>
>>> Dale, k9vuj



-- 

David (NOT Dave) Colburn, KD4E - Nevils, Georgia USA

Safe & Secure Search Engine: duckduckgo.com

Android for Hams: groups.yahoo.com/group/hamdroid
Creative Tech: groups.yahoo.com/group/ham-macguyver
Raspi Alternative: groups.yahoo.com/group/beagleboneblack/

Restored to design-spec at Heaven's gate 1Cor15:22


More information about the RFI mailing list