[RFI] Tecsun PL-660 for chasing RFI [Was: Is Icom IC-T90a AM-mode good for chasing RFI?]

[qrv at kd4e.com]

Jim,

	Is it possible to get at that switch & create a flat
setting? (Add another switch which interrupts the High wire
to add a High/Flat choice? I'm guessing they are adding or
removing a cap - so adding a 1/2 value cap should = Flat.)

	Someone mentioned needing to pull the batteries if left
sitting, which I'm guessing could be solved via a micro-switch
somewhere in the battery-to-radio line.

	WDYT?

David KD4E
>> Also a treble/bass switch.
> 
> The only thing I don't like about it -- one setting rolls of the lows,
> the other rolls off the highs, and there's no "center = flat" setting.
> Too bad, because this is a spectacularly good FM RX.
> 
> 73, Jim K9YC


-- 

David Colburn, KD4E - Nevils, Georgia USA

Safe & Secure Search Engine: duckduckgo.com

Android for Hams: groups.yahoo.com/group/hamdroid
Creative Tech: groups.yahoo.com/group/ham-macguyver
Raspi Alternative: groups.yahoo.com/group/beagleboneblack/

Restored to design-spec at Heaven's gate 1Cor15:22