[RFI] Query for the group.

Jim Brown jim at audiosystemsgroup.com
Sat Jul 25 16:54:16 EDT 2015


On Sat,7/25/2015 11:51 AM, Kenneth G. Gordon wrote:
> On 25 Jul 2015 at 13:31, Randy Farmer wrote:
>
>> Ethernet birdies.
> Ah. Makes sense. Dang.
>
>> You're lucky to have only two.

Each of those birdies around 14030 are synchronized to the clock on 
someone's router or switch. If you have neighbors, you'll hear a birdie 
for each of them. Identify your own by killing power to your router or 
switch. Ethernet also produces birdies around 21060, on the low end of 
10M CW, and the low end of 6M. There are also a few on 30M. These are 
the ones I've noted because I'm a CW op -- if you work SSB, you may find 
more. :)

> Well, actually, I don't KNOW that I have only two. On 40 and 80 there appears a
> "wandering" bit ofpretty loud crap that is pretty broad, and wonders up and down the band at
> intervals.

> I haven't tracked that one down yet, but suspect it is some sort of switching power
> supply somewhere close by.

Right -- they are harmonics of Switch-Mode Power Supplies. Everything 
from wall warts to computers to TVs to battery chargers of all sorts.


> Well, we have both wired and wireless in our local net. Up to 5 computers, 3 of which are
> hardwired.
>
> And, at this point, then, there isn't much I can do about them, I would suppose.
>
> I have added multiple turns of cat 5 through large ferrite "chokes", but mostly to keep my
> transmitter out of the hub. That worked.

Long cables will need a choke at both ends, and you may also need a 
choke on the power supply cable.

Consider adding WiFi adapters to your wired computers to eliminate 
radiation from those cables. I've been using nothing but WiFi in my home 
and shack (which is in a detached garage), and have all the bandwidth I 
need -- enough to support streaming audio and video.

73, Jim K9YC


More information about the RFI mailing list