[RFI] Ferrite "Loss Factor @Frequency"

[Ed K0iL]

Except you didn't repeat the referral link.

So here's the page with all the links:
http://k9yc.com/publish.htm 

Kim, 
You might need to contact Fair-rite about their units and symbols they used.  Might be a faster route to the info you seek.

73, de ed -K0iL

-----Original Message-----
From: RFI [mailto:rfi-bounces at contesting.com] On Behalf Of Jim Brown
Sent: Sunday, June 18, 2017 9:04 PM
To: rfi at contesting.com
Subject: Re: [RFI] Ferrite "Loss Factor @Frequency"

Hi Kim,

Several times, I've referred questions like this to my RFI tutorial.  I spent years learning it, and months writing it up. I'm not going to repeat it here. Instead, I'll repeat the referral.

73, Jim K9YC

On Sun,6/18/2017 6:20 PM, Kim Elmore wrote:
> As I was perusing type 31 material the Fair-Rite web site, I ran 
> across a a material characteristic that is new to me: "Loss Factor @ 
> Frequency." For type 31 material, the units are in 10e-06 MHz, the 
> symbol is Tan δ/ µi  and it's 20 @ 0.01. How do I interpret this 
> characteristic?
>
> Kim N5OP
>
>

_______________________________________________
RFI mailing list
RFI at contesting.com
http://lists.contesting.com/mailman/listinfo/rfi