[RFI] Effectiveness of your rig's DSP on Power Line RFI

David Eckhardt davearea51a at gmail.com
Thu Nov 19 18:13:57 EST 2020

Spend a tad more and purchase something outstanding, not only the NB, but
the rest of the radio.  Take a serious look at the Icom 7300.  The NB just
works!  Recently, I've seen them go used for as low as $850, but that is

Dave - WØLEV

On Thu, Nov 19, 2020 at 10:33 PM Charles Plunk <af4o at twc.com> wrote:

> I am considering purchase of a used or new rig with DSP under 1k.
> Looking for personal opinions on a specific rigs DSP's effectiveness to
> combat power line noise if any at all. My mode preferences are cw first,
> then digital, ssb, AM broadcast swl.
> My Elecraft KX2 DSP and BHI do very little IMO for power line arc. NB's
> on my old TS830s and TenTec Triton IV (both non DSP) work pretty well
> but not perfect on consistent power line arc, intermittent arc less
> effective.
> Not really interested in any responses of getting the power co to fix,
> how to locate, etc. Been through all this, looking for something to help
> filter it until a fix is effected. I suspect most answers will be DSP
> just was not designed to do that but there is hope, lol.
> Thanks!
> Chuck
> AF4O
> _______________________________________________
> RFI mailing list
> RFI at contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi

*Dave - WØLEV*
*Just Let Darwin Work*

More information about the RFI mailing list