[RTTY] signal monitor

[WA9ALS - John]

The 706MKIIG is my second radio.  It doesn't monitor output.  When I do
limited SO2R, I usually monitor my first radio (PROII) and don't monitor my
second (706).  This weirdness helps me know which one is transmitting.

If the 706 was my only radio, I wouldn't like not having a monitor function
for FSK.  Whether you use it all the time or not, monitoring is nice to
check if you're upside down or having other problems.  (Hey, you can use
your main rig for that if you're careful!

----- Original Message ----- 
From: "Alan Realey" <alan.r1 at comcast.net>
To: <RTTY at contesting.com>
Sent: Tuesday, May 27, 2003 4:36 PM
Subject: [RTTY] signal monitor


>
> Hi All,
>
> I am attempting to use MMTTY and an Icom 706 MKIIG (my back-up rig) in the
FSK mode. It seems to work fine, but I am unable to monitor my RTTY output
via speakers or headphones.  This is not a problem in the "soundcard" modes;
thus it leads me to believe that the 706 provides for no monitoring function
of output sounds. The manual does not address this issue. Is anyone familiar
with this rig in the FSK mode?
>
> Thanks and 73,
>
> Al
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>