[RTTY] RTTY Digest, Vol 40, Issue 1

[Bill Turner]

ORIGINAL MESSAGE:

At 08:05 AM 4/1/2006, Charles Morrison wrote:

>Just a note, if the radio is left in autobaud, it wont reset itself if you
>load a program with a different baud rate.  IE: I had ACLog set to 19.2 and
>Writelog set to 9600 and the radio set to autobaud.  If I loaded either WL
>or ACL first, the other wouldn't work without resetting the radio.  I of
>course solved it by setting all programs to the same, as well as locking in
>the baud rate on the radio.  No problems after that.

*********** REPLY SEPARATOR ***********

Thanks for the info. I have always used a manual baud setting so I've 
never experienced that, but it's good to know.

73, Bill W6WRT