[RTTY] operator error- pse help

[Joe Subich, W4TV]

Joe,

Please contact me off the list ... I have information for you
but your ISP is blocking e-mail from my ISP's mail server.
Unfortunately, I can no longer use any of my alternate e-mail
addresses to "send" e-mail since my carrier prohibits and
blocks direct outbound e-mail.

73,

    ... Joe Subich, W4TV
        microHAM America, LLC.
        www.microHAM-USA.com




> -----Original Message-----
> From: rtty-bounces at contesting.com
> [mailto:rtty-bounces at contesting.com] On Behalf Of K0BX
> Sent: Tuesday, January 10, 2006 7:43 PM
> To: RTTY
> Cc: Jim Hoge
> Subject: Re: [RTTY] operator error- pse help
>
>
> I do not have an answer for this, but this combination MKV,
> Rig Blaster and MMTTY always is the one that needs help to
> get on FSK.
>
> I wonder if someone who has done this combo could write an set
> of instructions on how to do it?  I would be happy to put it on
> my website or send it to AA5AU for his website.
>
> I am glad that Jim W5QM wants to use FSK and I am glad that
> he came to this RTTY group for help.  But we get this question
> asked at least once a month.
>
> So please help.
>
> Joe K0BX
> on rtty since 1975
>
> Jim Hoge wrote:
>
> > Greetings,
> >
> >   The RU was my first venture into RTTY and I had a blast.
> Now then, please help this op overcome his errors. I have a
> Yaesu Mk-V and a Rigblaster Plus and am running MMTTY. I have
> no problem using the stuff while operating the radio in lsb
> but I would rather operate the rig in its rtty mode to take
> advantage of all those extra filters I have. (The contest was
> difficult at best with an operational passband of 1.8k in
> sideband mode.) The question is this, I (think) I have done
> everything right but obviously not as I can't get the radio
> to work in rtty mode. I have setup the software as sound +
> COM-TxD (FSK), made a cable to go from the Rigblaster's key
> out to the radio's rtty din jack, tested the cable by
> shorting it to confirm that when shorted and opened, the
> radio toggles between mark and space tones. Now when I try to
> key the rig, it does so but nothing is sent, only the higher
> of the two tones although the computer indicates it is
> sending. Again, everything works fine
> in
> >  lsb mode
> >  but not rtty. Oh, the jumpers in the Rigblaster are set in
> default positions. Any help would be most appreciated. Tnx, Jim W5QM
> > _______________________________________________
> > RTTY mailing list
> > RTTY at contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
>
> --
> Stop the insanity!
> Please do not add me to any distribution lists (Joke, Stories
> or Junk)
> without my permission.
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>