[RTTY] FT1000 Field Settings

[Joe Subich, W4TV]

John,

It is likely that tone frequencies in your friend's Mark V Field
do not correspond to the tones in his receive software.

Assuming MMTTY:

   Demodulator:  Mark 2125 Hz   Shift 170 Hz
   AFC:          AFC OFF (not checked)  FSK Selected

FT-1000MP/Mark V Field:

  6-0  rttY-SHF     170
  6-1  rtty-PoL     rEvErSE
  6-2  rttY-ton     Hi tonE
  6-2  rtY-FdSP     oFFSEt

If he is using low tones (menu 6-2) MMTTY Mark should be 1275.

73,

    ... Joe, W4TV




> -----Original Message-----
> From: rtty-bounces at contesting.com
> [mailto:rtty-bounces at contesting.com] On Behalf Of John Holmes
> Sent: Thursday, January 26, 2006 1:04 PM
> To: RTTY at contesting.com
> Subject: [RTTY] FT1000 Field Settings
>
>
> Guys, I just spoke with a ham using the FT1000 Field and he
> had a question that I thought should be referred to the group
> as I don't have this type of rig. The question:
> "I am operating FSK with an FT1000 Field and the receive
> stations are all off freq when I operate RTTY LSB...should I
> use RTTY USB?   When I switch to RTY-USB the receive changes.
> In any case I can copy using the clarifier offset."
> Could someone let me know the correct settings for FSK on the
> 1000 Field and I will relay the info.
> Thanks in advance. 73,
>
> John W9ILY
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>